Guide

OVERLAY PLUS^®

Home | Screen Protectors | Cases | Others | Browse



Trending : Samsung Galaxy Note , BlackBerry Bold 9700/9780 , Samsung Galaxy Tab 7.7 , Samsung Galaxy Nexus

. . . Installation Guide (Video) . . . . . . Cleaning Guide (Video) . . . . . . Remove Guide (Video) . . .
. . . Installation Guide. . .
Things to prepare: Cleaning cloth (3M Scotch-Brite recommended) Scotch tape Tissue paper
	Step 1: Wipe the screen with a lint-free cloth to remove any dirt and dust. Important Step Use a piece of scotch tape to remove any residue dirt and dust particles on the screen. If required to, run a length of scotch tape across the screen to remove the particles.	Step 2: Peel off the protector's adhesive backing from the edge. Take precaution not to leave any dust and fingerprints on the protector's adhesive side.	Step 3: Carefully align the protector over the screen surface. Apply the screen protector on to the screen surface by gently pushing it over the screen with your fingers. If any bubbles form, peel the protector to where the bubble is and remove any dust and dirt particles that are trapped on the protector's adhesive side with a piece of scotch tape. The adhesiveness of the scotch tape will help remove dust and dirt particles on the screen surface, the protector's surface as well as those trapped on the protector's adhesive side.
. . . Other Useful Tips. . .

	Remove Bubbles: Use a tissue paper or cloth to gently push out any remaining air bubbles to the sides of the device's screen.	Remove Guide: To remove the screen protector, use a length of scotch tape. Paste about an inch firmly on one corner of the screen protector, hold the other end of the tape and lift it up slowly.	Cleaning Guide: Once properly applied on the screen, use a piece of tissue paper to clean off any fingerprints and smudges off the protector surface. If any dust and dirt particles are trapped in between the screen and protector, use a piece of scotch tape to remove the particles. If required to, run a length of scotch tape across the protector to remove the particles.